What Is Custom Machined Parts Cost?
custom machined parts cost is one of the main products of NOCK Industrial-CNC custom machining factory. It has various designs which integrate compelling aesthetics and functionality, giving a real edge over competitors. It has a relatively long service life and performs well during its service life. Thanks to its good performance and strong functionality, the product can be applied in many fields and has a promising market application potential.
NK has set up brilliant influence locally and globally with our series of products, which is noted for its creativity, practicality, aesthetics. Our deep brand awareness also contributes to our business sustainability. Over the years, our products under this brand have received high praises and wide recognition worldwide. Under the help of talented personnel and our pursuit of high quality, the products under our brand have been sold well.
Good customer service is essential to achieve success in any industry. Therefore, while improving the products such as custom machined parts cost, we have made great efforts in improving our customer service. For example, we have optimized our distribution system to guarantee more efficient delivery. In addition, at NOCK Industrial, customers can also enjoy one-stop customization service.
no data
There are many reasons for processing deformation of aluminum parts, which are related to material, part shape, production conditions and so on. It mainly includes the following aspects: deformation caused by internal stress of blank, deformation caused by cutting force and cutting heat, and deformation caused by clamping force.
1 Process measures to reduce machining deformation 1. Reduce the internal stress of the blank. Natural or artificial aging and vibration treatment can partially eliminate the internal stress of the blank. Pre processing is also an effective process method. For the blank with fat head and big ears, due to the large allowance, the deformation after processing is also large. If the surplus part of the blank is processed in advance and the margin of each part is reduced, it can not only reduce the processing deformation of the subsequent process, but also release part of the internal stress after being placed for a period of time. 2. Improving the cutting ability of the tool, the material and geometric parameters of the tool have an important impact on the cutting force and cutting heat. The correct selection of the tool is very important to reduce the machining deformation of the part.
1) Reasonably select tool geometric parameters. Rake angle: under the condition of maintaining the strength of the blade, the rake angle should be appropriately larger. On the one hand, it can grind a sharp edge, and on the other hand, it can reduce the cutting deformation, make the chip removal smooth, and then reduce the cutting force and cutting temperature. Do not use negative rake tools. Back angle: the size of the back angle has a direct impact on the wear of the back cutter surface and the quality of the machined surface. Cutting thickness is an important condition for selecting back angle. During rough milling, due to large feed rate, heavy cutting load and large calorific value, it is required that the tool heat dissipation conditions are good. Therefore, the back angle should be smaller. During finish milling, the cutting edge shall be sharp to reduce the friction between the flank and the machined surface and reduce elastic deformation. Therefore, the back angle shall be larger. Helix angle: in order to make milling smooth and reduce milling force, the helix angle should be as large as possible. Main deflection angle: properly reducing the main deflection angle can improve the heat dissipation conditions and reduce the average temperature of the processing area.
2) Improve tool structure. Reduce the number of milling cutter teeth and increase the chip holding space. Due to the large plasticity of aluminum parts, large cutting deformation in machining and large chip holding space, it is better to have a large radius of chip holding groove bottom and a small number of milling cutter teeth. Fine grinding of cutter teeth. The roughness value of the cutting edge of the cutter tooth shall be less than RA = 0.4um. Before using a new knife, gently grind the front and back of the knife teeth with a fine oilstone to eliminate the residual burrs and slight serrations when grinding the knife teeth. In this way, not only the cutting heat can be reduced, but also the cutting deformation is relatively small. Strictly control the tool wear standard. After tool wear, the workpiece surface roughness increases, the cutting temperature increases, and the workpiece deformation increases. Therefore, in addition to the selection of tool materials with good wear resistance, the tool wear standard should not be greater than 0.2mm, otherwise it is easy to produce chip buildup. During cutting, the temperature of the workpiece shall not exceed 100 to prevent deformation.
3. Improve the clamping method of workpieces. For thin-walled aluminum workpieces with poor rigidity, the following clamping methods can be adopted to reduce deformation: for thin-walled bushing parts, if they are clamped radially with three claw self centering chuck or spring collet, once they are loosened after processing, the workpiece will inevitably deform. At this time, the axial end face compression method with good rigidity should be used. Locate with the inner hole of the part, make a self-made threaded mandrel, insert it into the inner hole of the part, press the end face with a cover plate, and then tighten it with a nut. When machining the outer circle, the clamping deformation can be avoided, so as to obtain satisfactory machining accuracy. When processing thin-walled sheet metal workpiece, it is best to select vacuum suction cup to obtain evenly distributed clamping force, and then process it with small cutting parameters, which can well prevent workpiece deformation. In addition, the packing method can also be used. In order to increase the process rigidity of thin-walled workpiece, medium can be filled in the workpiece to reduce the deformation of workpiece during clamping and cutting. For example, fill the workpiece with urea melt containing 3% 6% potassium nitrate. After processing, immerse the workpiece in water or alcohol to dissolve and pour out the filler.
4. When the process is reasonably arranged for high-speed cutting, due to the large machining allowance and intermittent cutting, the milling process often produces vibration, which affects the machining accuracy and surface roughness. Therefore, NC High-speed machining process can be generally divided into: rough machining - semi finishing - corner cleaning - finishing and so on. For parts with high precision requirements, it is sometimes necessary to carry out secondary and semi finishing, and then finish machining. After rough machining, the parts can be cooled naturally to eliminate the internal stress caused by rough machining and reduce deformation. The allowance left after rough machining shall be greater than the deformation, generally 1 2mm. During finish machining, the finished surface of parts shall maintain a uniform machining allowance, generally 0.2 0.5mm, so that the tool is in a stable state in the machining process, which can greatly reduce the cutting deformation, obtain good surface machining quality and ensure the accuracy of products. 2 In addition to the above reasons, the operation method is also very important in practical operation.
1. For parts with large machining allowance, in order to have better heat dissipation conditions during machining and avoid heat concentration, symmetrical machining should be adopted. If a 90mm thick plate needs to be processed to 60mm, if one side is milled immediately and the other side is milled to the final size at one time, the flatness will reach 5mm; If repeated feed symmetrical processing is adopted, each side is processed to the final size twice to ensure that the flatness reaches 0.3mm. 2. If there are multiple cavities on the plate parts, the sequential processing method of one cavity one cavity should not be adopted during processing, which is easy to cause uneven stress and deformation of the parts. It adopts multiple processing in layers, and each layer shall be processed to all cavities at the same time as far as possible, and then the next layer shall be processed to make the parts bear the force evenly and reduce the deformation. 3. Cutting force and cutting heat can be reduced by changing cutting parameters. Among the three elements of cutting parameters, the back draft has a great influence on the cutting force. If the machining allowance is too large and the cutting force of one-time tool walking is too large, it will not only deform the parts, but also affect the rigidity of the machine tool spindle and reduce the durability of the tool. If we reduce the amount of back knife, the production efficiency will be greatly reduced. However, in NC machining, high-speed milling can overcome this problem. While reducing the back draft, as long as the feed is increased accordingly and the rotating speed of the machine tool is increased, the cutting force can be reduced and the machining efficiency can be guaranteed.
4. Pay attention to the order of cutting. Rough machining emphasizes the improvement of machining efficiency and the pursuit of cutting rate per unit time. Generally, reverse milling can be used. That is to cut off the excess material on the surface of the blank at the fastest speed and in the shortest time to basically form the geometric contour required for finishing. The finishing emphasizes high precision and high quality, and forward milling should be adopted. Because the cutting thickness of the cutter teeth gradually decreases from the maximum to zero during forward milling, the work hardening degree is greatly reduced and the deformation degree of the parts is reduced at the same time. 5. The deformation of thin-walled workpiece during machining due to clamping is difficult to avoid even finish machining. In order to minimize the deformation of the workpiece, the pressing part can be loosened before the finish machining is about to reach the final size, so that the workpiece can be freely restored to the original state, and then slightly pressed, subject to the ability to clamp the workpiece (completely by hand feeling), so as to obtain the ideal machining effect. In short, the action point of the clamping force is best on the bearing surface. The clamping force should act in the direction of good rigidity of the workpiece. On the premise of ensuring that the workpiece is not loose, the smaller the clamping force, the better. 6. When machining parts with cavity, try not to let the milling cutter directly plunge into the parts like a drill bit, resulting in insufficient chip holding space of the milling cutter and unsmooth chip removal, resulting in overheating, expansion, tool collapse, tool breakage and other adverse phenomena of the parts. First drill the cutter hole with a drill of the same size or larger than the milling cutter, and then mill with a milling cutter. Alternatively, the spiral cutting program can be produced with CAM software. The main factor affecting the machining accuracy and surface quality of aluminum parts is that such parts are prone to deformation in the machining process, which requires operators to have certain operation experience and skills.
Original title: process measures and operation skills to reduce aluminum processing deformation! Machining super practical knowledge!The source of the article: WeChat official account: world advanced manufacturing technology forum, welcome to add attention! Please indicate the source of the article.
1 Process measures to reduce machining deformation 1. Reduce the internal stress of the blank. Natural or artificial aging and vibration treatment can partially eliminate the internal stress of the blank. Pre processing is also an effective process method. For the blank with fat head and big ears, due to the large allowance, the deformation after processing is also large. If the surplus part of the blank is processed in advance and the margin of each part is reduced, it can not only reduce the processing deformation of the subsequent process, but also release part of the internal stress after being placed for a period of time. 2. Improving the cutting ability of the tool, the material and geometric parameters of the tool have an important impact on the cutting force and cutting heat. The correct selection of the tool is very important to reduce the machining deformation of the part.
1) Reasonably select tool geometric parameters. Rake angle: under the condition of maintaining the strength of the blade, the rake angle should be appropriately larger. On the one hand, it can grind a sharp edge, and on the other hand, it can reduce the cutting deformation, make the chip removal smooth, and then reduce the cutting force and cutting temperature. Do not use negative rake tools. Back angle: the size of the back angle has a direct impact on the wear of the back cutter surface and the quality of the machined surface. Cutting thickness is an important condition for selecting back angle. During rough milling, due to large feed rate, heavy cutting load and large calorific value, it is required that the tool heat dissipation conditions are good. Therefore, the back angle should be smaller. During finish milling, the cutting edge shall be sharp to reduce the friction between the flank and the machined surface and reduce elastic deformation. Therefore, the back angle shall be larger. Helix angle: in order to make milling smooth and reduce milling force, the helix angle should be as large as possible. Main deflection angle: properly reducing the main deflection angle can improve the heat dissipation conditions and reduce the average temperature of the processing area.
2) Improve tool structure. Reduce the number of milling cutter teeth and increase the chip holding space. Due to the large plasticity of aluminum parts, large cutting deformation in machining and large chip holding space, it is better to have a large radius of chip holding groove bottom and a small number of milling cutter teeth. Fine grinding of cutter teeth. The roughness value of the cutting edge of the cutter tooth shall be less than RA = 0.4um. Before using a new knife, gently grind the front and back of the knife teeth with a fine oilstone to eliminate the residual burrs and slight serrations when grinding the knife teeth. In this way, not only the cutting heat can be reduced, but also the cutting deformation is relatively small. Strictly control the tool wear standard. After tool wear, the workpiece surface roughness increases, the cutting temperature increases, and the workpiece deformation increases. Therefore, in addition to the selection of tool materials with good wear resistance, the tool wear standard should not be greater than 0.2mm, otherwise it is easy to produce chip buildup. During cutting, the temperature of the workpiece shall not exceed 100 to prevent deformation.
3. Improve the clamping method of workpieces. For thin-walled aluminum workpieces with poor rigidity, the following clamping methods can be adopted to reduce deformation: for thin-walled bushing parts, if they are clamped radially with three claw self centering chuck or spring collet, once they are loosened after processing, the workpiece will inevitably deform. At this time, the axial end face compression method with good rigidity should be used. Locate with the inner hole of the part, make a self-made threaded mandrel, insert it into the inner hole of the part, press the end face with a cover plate, and then tighten it with a nut. When machining the outer circle, the clamping deformation can be avoided, so as to obtain satisfactory machining accuracy. When processing thin-walled sheet metal workpiece, it is best to select vacuum suction cup to obtain evenly distributed clamping force, and then process it with small cutting parameters, which can well prevent workpiece deformation. In addition, the packing method can also be used. In order to increase the process rigidity of thin-walled workpiece, medium can be filled in the workpiece to reduce the deformation of workpiece during clamping and cutting. For example, fill the workpiece with urea melt containing 3% 6% potassium nitrate. After processing, immerse the workpiece in water or alcohol to dissolve and pour out the filler.
4. When the process is reasonably arranged for high-speed cutting, due to the large machining allowance and intermittent cutting, the milling process often produces vibration, which affects the machining accuracy and surface roughness. Therefore, NC High-speed machining process can be generally divided into: rough machining - semi finishing - corner cleaning - finishing and so on. For parts with high precision requirements, it is sometimes necessary to carry out secondary and semi finishing, and then finish machining. After rough machining, the parts can be cooled naturally to eliminate the internal stress caused by rough machining and reduce deformation. The allowance left after rough machining shall be greater than the deformation, generally 1 2mm. During finish machining, the finished surface of parts shall maintain a uniform machining allowance, generally 0.2 0.5mm, so that the tool is in a stable state in the machining process, which can greatly reduce the cutting deformation, obtain good surface machining quality and ensure the accuracy of products. 2 In addition to the above reasons, the operation method is also very important in practical operation.
1. For parts with large machining allowance, in order to have better heat dissipation conditions during machining and avoid heat concentration, symmetrical machining should be adopted. If a 90mm thick plate needs to be processed to 60mm, if one side is milled immediately and the other side is milled to the final size at one time, the flatness will reach 5mm; If repeated feed symmetrical processing is adopted, each side is processed to the final size twice to ensure that the flatness reaches 0.3mm. 2. If there are multiple cavities on the plate parts, the sequential processing method of one cavity one cavity should not be adopted during processing, which is easy to cause uneven stress and deformation of the parts. It adopts multiple processing in layers, and each layer shall be processed to all cavities at the same time as far as possible, and then the next layer shall be processed to make the parts bear the force evenly and reduce the deformation. 3. Cutting force and cutting heat can be reduced by changing cutting parameters. Among the three elements of cutting parameters, the back draft has a great influence on the cutting force. If the machining allowance is too large and the cutting force of one-time tool walking is too large, it will not only deform the parts, but also affect the rigidity of the machine tool spindle and reduce the durability of the tool. If we reduce the amount of back knife, the production efficiency will be greatly reduced. However, in NC machining, high-speed milling can overcome this problem. While reducing the back draft, as long as the feed is increased accordingly and the rotating speed of the machine tool is increased, the cutting force can be reduced and the machining efficiency can be guaranteed.
4. Pay attention to the order of cutting. Rough machining emphasizes the improvement of machining efficiency and the pursuit of cutting rate per unit time. Generally, reverse milling can be used. That is to cut off the excess material on the surface of the blank at the fastest speed and in the shortest time to basically form the geometric contour required for finishing. The finishing emphasizes high precision and high quality, and forward milling should be adopted. Because the cutting thickness of the cutter teeth gradually decreases from the maximum to zero during forward milling, the work hardening degree is greatly reduced and the deformation degree of the parts is reduced at the same time. 5. The deformation of thin-walled workpiece during machining due to clamping is difficult to avoid even finish machining. In order to minimize the deformation of the workpiece, the pressing part can be loosened before the finish machining is about to reach the final size, so that the workpiece can be freely restored to the original state, and then slightly pressed, subject to the ability to clamp the workpiece (completely by hand feeling), so as to obtain the ideal machining effect. In short, the action point of the clamping force is best on the bearing surface. The clamping force should act in the direction of good rigidity of the workpiece. On the premise of ensuring that the workpiece is not loose, the smaller the clamping force, the better. 6. When machining parts with cavity, try not to let the milling cutter directly plunge into the parts like a drill bit, resulting in insufficient chip holding space of the milling cutter and unsmooth chip removal, resulting in overheating, expansion, tool collapse, tool breakage and other adverse phenomena of the parts. First drill the cutter hole with a drill of the same size or larger than the milling cutter, and then mill with a milling cutter. Alternatively, the spiral cutting program can be produced with CAM software. The main factor affecting the machining accuracy and surface quality of aluminum parts is that such parts are prone to deformation in the machining process, which requires operators to have certain operation experience and skills.
Original title: process measures and operation skills to reduce aluminum processing deformation! Machining super practical knowledge!The source of the article: WeChat official account: world advanced manufacturing technology forum, welcome to add attention! Please indicate the source of the article.
Aluminum is a rich element in nature. It has the advantages of light weight, good ductility, easy processing, corrosion resistance and so on. In addition to aluminum, the main material of aviation aluminum also adds magnesium, which is a metal of aluminum alloy. Aluminum alloy is an important raw material in industrial manufacturing. It has low density but high strength. It is close to or higher than high-quality steel. It has good plasticity. It can be processed into various profiles. It has excellent conductivity, thermal conductivity and corrosion resistance. It is widely used in industry. Especially in the field of automobile industry, aluminum alloy parts account for the vast majority.
Due to the particularity of material, aluminum alloy parts have high requirements for processing technology. Burr is produced by the extrusion of metal by cutting tools in the machining process. Deburring aluminum alloy machined parts is an essential step in the production process. The quality of deburring process directly affects the product quality of parts. Robot loading sycotec high-speed motorized spindle has high deburring efficiency and high precision, and realizes industrial automation, which is of great significance to the long-term development of processing enterprises.The principle of deburring aviation aluminum parts by industrial robot spindle is similar to manual deburring, but it changes the power into robot. With the support of programming technology and force control technology, flexible grinding (transformation of pressure and speed) is realized, and the advantages of robot deburring are prominent. This is a very popular automatic deburring method for aviation aluminum parts.The deburring of aviation aluminum parts has little requirements on the output of the main shaft, but has great requirements on the precision and speed of the main shaft. If the speed is low and the precision is low, the effect of deburring will be insufficient. Kasite 4036 DC-T ER11 high-speed motorized spindle has a maximum speed of 60000 rpm, a maximum power of 850W, and a cone runout of no more than 1 m. It is equipped with ER11 chuck, which can be applied to industrial robots such as abb, KUKA, stauber, etc.
Kasite 4036 DC-T ER11 is a deburring high-speed motorized spindle with radial axial flexible floating system. The contact pressure with the workpiece can be pneumatically adjusted to keep the pressure consistent at 360 . When machining parts with complex shapes or positioning dimensions have certain errors (within a certain range), the spindle will automatically offset and float radially or axially, so as to achieve the effect of accurate deburring.
Due to the particularity of material, aluminum alloy parts have high requirements for processing technology. Burr is produced by the extrusion of metal by cutting tools in the machining process. Deburring aluminum alloy machined parts is an essential step in the production process. The quality of deburring process directly affects the product quality of parts. Robot loading sycotec high-speed motorized spindle has high deburring efficiency and high precision, and realizes industrial automation, which is of great significance to the long-term development of processing enterprises.The principle of deburring aviation aluminum parts by industrial robot spindle is similar to manual deburring, but it changes the power into robot. With the support of programming technology and force control technology, flexible grinding (transformation of pressure and speed) is realized, and the advantages of robot deburring are prominent. This is a very popular automatic deburring method for aviation aluminum parts.The deburring of aviation aluminum parts has little requirements on the output of the main shaft, but has great requirements on the precision and speed of the main shaft. If the speed is low and the precision is low, the effect of deburring will be insufficient. Kasite 4036 DC-T ER11 high-speed motorized spindle has a maximum speed of 60000 rpm, a maximum power of 850W, and a cone runout of no more than 1 m. It is equipped with ER11 chuck, which can be applied to industrial robots such as abb, KUKA, stauber, etc.
Kasite 4036 DC-T ER11 is a deburring high-speed motorized spindle with radial axial flexible floating system. The contact pressure with the workpiece can be pneumatically adjusted to keep the pressure consistent at 360 . When machining parts with complex shapes or positioning dimensions have certain errors (within a certain range), the spindle will automatically offset and float radially or axially, so as to achieve the effect of accurate deburring.
no data
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
To be the best metal parts integrated service provider with customer service experience.
Contact Us
Add:
Zhenglong East 29, Matian Street, Gongming District, Shenzhen
Contact person: May Zhang
Tel: +86 150 2361 2048
WhatsApp: +86 150 2361 2048